1-800-860-8388

Thru-Roof Assemblies Archives

240X (CU 1/2" x 15")

Assembly includes 1/2″x 15″ copper stem threaded 2 inches, neoprene washer (247A), nailing bracket and cable connector. Wt. 1.14 lbs. each. 22 28S 32S 40 21 G3 A22 A28 A30 Download Cut Sheet

272A

Cast bronze with swivel crimp connector on each end with threaded stainless steel rod 3/8″ x 4-3/4″. Wt. .76 lb. each. 22 28S 32S 40 21 G3 A22 A28 A30 Download Cut Sheet

325

Cast bronze connector with pressure style cable fastener on top and crimp connector on bottom side. Bottom side of part is recessed to allow for sealant to assure a weather tight seal. Wt. .72 lbs. 22 28S 32S 40 21 G3 A22 A28 A30 Download Cut Sheet

597BM

Machined brass and cast aluminum assembly consists of aluminum IP-A597 cap, cable connector on top, IP-M597C brass bottom cable connector with set screws and 1/2″ x 8″ threaded stainless steel rod. Wt. .80 lbs. each. The PVC conduit and boot flashing are shown for illustrative purposes only and are not supplied by IPC as part […]

597BM With 179A

Cast bronze and machined aluminum assembly consists of IP-A597 cap, cable connector, IP-179A base plate, IP-M597C bottom cable connector with set screws and 1/2″ x 8″ threaded stainless steel rod. Wt. 1.60 lbs. each. The PVC conduit and boot flashing are shown for illustrative purposes only and are not supplied by IPC as part of […]

597C

Cast bronze and machined brass assembly consists of IP-597 cap, cable connector, IP-M597C bottom cable connector with set screws and 1/2″ x 8″ threaded stainless steel rod. Wt. 1.18 lbs. each. The PVC conduit and boot flashing are shown for illustrative purposes only and are not supplied by IPC as part of the assembly. Longer […]

597C With 179A

Cast bronze and machined brass assembly consists of IP-597 cap, cable connector, IP-179A base plate, IP-M597C bottom cable connector with set screws and 1/2″ x 8″ threaded stainless steel rod. Wt. 1.60 lbs. each. The PVC conduit and boot flashing are shown for illustrative purposes only and are not supplied by IPC as part of […]

597X

Cast bronze thru roof connector consists of IP-596 bus connector, IP-345X flashing plate, Neoprene® washer, hex nut, washer, 297A cable connector and 1/2″ x 8″ threaded stainless steel rod. Wt. 2.04 lbs. each. 22 28S 32S 40 21 G3 A22 A28 A30 Download Cut Sheet

A240 (AL 1/2" x 15")

Assembly includes 1/2″x 15″ aluminum stem threaded 2 inches, neoprene washer (247A), nailing bracket and cable connector. Wt. .50 lb each. 22 28S 32S 40 21 G3 A22 A28 A30 Download Cut Sheet
« Previous Page